Tri-wiring / Bi-wiring
Tri-wiring means that the bass, midrange and treble tone ranges are each fed through their own separate speaker cable. In the ultimate set-up, there is an amplifier to handle each range (tri-amping). Tri-amping is the sophisticated consequence of multi-wiring in a multipath speaker, which allows the maximum benefit of the EUPHONIA MS5. All other EUPHONIA models are connected by bi-wiring.
Bi-wiring or bi-amping improves the acoustic quality markedly and can be highly recommended. Bi-wiring provides greater openness in the acoustic image and reduces distortion. Bi-amping - when separate amplifiers are used for the bass/midrange tone and treble ranges - provides even greater openness in the acoustic image and adds increased dynamics.
For bi-wiring on the MS5, we recommend that the treble and midrange terminals are combined and the bass terminals are supplied separately.
DALI® EUPHONIA speakers can, of course, be used with single-wiring. In this case, the enclosed cables should be used with three stripped parts that are fed down through the terminals, thus connecting the bass, mid-
range and tweeter terminals.
DALI® recommends that EUPHONIA speakers are connected with bi-wiring as a minimum to ensure the best possible conditions for acoustic imaging.
Treble
Midrange
Bass
We recommend DALI® Silver Wave Four speaker cables for bi-wiring. For tri-wiring, we recommend DALI® Silver Wave Four for the treble and midrange tone range, and DALI® Silver Wave for the bass. This keeps powerful currents from the bass signals away from the cables that carry the treble/midrange tone signals.
