Output terminals

Functions

The output terminals (Left & Right) provide a filtered output signal with a crosso-

EUPHONIA

ver frequency of 70 Hz and cut off with a 2nd order high-pass filter. This set of ter-

AS2

minals can be used if the subwoofer is used together with the speaker driven by a separate amplifier, if you want only the frequency range over 70 Hz to be handled here, e.g. to protect the speaker system against very low frequency content - low frequencies which the AS 2 has been selected to deal with.

Other functions

The 'Power' button is the main switch for the system. You should switch off the system completely when it will not be in use for long periods. When making or changing connections, you must always switch off the system completely.

The 'Auto Shut Off' function places the AS2 in stand-by mode after 15 minutes without a signal on the input. When the AS2 receives a signal again, the system comes on automatically.

Overloading

If you often play very loud, you should be careful of any dissonance or distor- tions. The AS2 is protected against short-term overloading, but if you oftentend to overdrive the system, you should use a permanently lower setting on the volume level control on the AS2. Repeat any phase adjustment to improve the connection between the front speaker and subwoofer. It may be this fine adjustment which provides the desired deep bass level.

11