Danby DAC7037M manuel dutilisation Operating Instructions, Selector Switch, Thermosta

Operating Instructions

SELECTOR SWITCH

The selector switch controls fan speed and/or cooling speed.To set desired cooling temperature, simply rotate the SELECTOR knob to the appropriate setting.

FAN SPEEDS

LOWFAN " " will circulate air at minimum speed without cooling.

Thermostat

TEMP.

5

4

6

• MEDFAN ""will circulate air at medium speed without cooling.

•HIGHFAN " "will circulate air at maximum speed without cooling.

COOLING MODES

•LOW COOL" " provides cooling with minimum air circulation. Recommended for night-time use.

•MED COOL" " provides cooling with medium air circulation. Recommended for night-time use.

•HIGHCOOL" "provides cooling with maximum air circulation. Recommended for quick cooling or for extremely hot days. Once room is cooled, reduce setting to LOW COOL .

•OFF shuts-down the unit completely.

NOTE: Always allow 3 minutes before switching from one mode to another.

THERMOSTA

The thermostat automatically controls the (compressor) cooling cycle and maintains the selected room temperature.To set the thermostat, rotate the thermostat knob to the desired cooling setting (1 warmest ~ 7 coldest). The fan motor will continue to operate after the compressor (cooling) has cycled off.This is normal.

3

2

1 7

OFF

ARRÊT

Selector

Switch

CAUTION

When using FAN control, turn selector switch slowly allowing unit to adjust.

When using THERMOSTAT, be sure to allow three minutes before changing temperature. Adjusting too quickly may cause compresspr to overload.

7