Electrical Specifications

1.All wiring must comply with local and national electrical codes and must be installed by a qualified electrician. If you have any questions regarding the following instructions, contact a qualified electrician.

2.Check available power supply and resolve any

wiring problems BEFORE installing and operating this unit.

3.This 115V air conditioner uses 12.0 or less nameplate amps and may be used in any properly wired, general purpose household receptacle. See Table 1 for specifications for individual branch circuit.

4.For your safety and protection, this unit is grounded through the power cord plug when plugged into into a matching wall outlet. If you are not sure whether your wall outlet is properly grounded, please consult a qualified electrician.

5.The wall outlet (3-pin) must match the plug (3- pin) on the service cord supplied with the unit. DO NOT use plug adapters. See Table 2 for receptacle and fuse information. If it is necessary to use an extension cord to connect your air conditioner, use an approved "air conditioner" extension cord only. (available at most local hardware stores)

6.The rating plate on the unit contains electrical and other technical data. The rating plate

is located on the right side of the unit, above the power cord.

Table 1: Suggested Individual Branch Circuit

Nameplate Amps

AWG Wire Size*

5.0 to 12

14

AWG- American Wire Gage

* Based on copper wire at 60 °C temperature rating.

Table 2: Receptacle and Fuse Types

Rated Volts

125

Amp

15

Wall Outlet

 

Fuse Size

15

Time Delay Fuse

Plug Type

(or circuit breaker)

 

The power cord supplied with this air conditioner contains a current leakage detection device de- signed to reduce the risk of fire.Please refer to the section “ Power Supply Cord”for details.In the event the power supply cord is damaged,it cannot be repaied it must be replaced with a new cord from the Product Manufacturer.

Under no circumstances should this device be used to turn the air conditioner on or off.

The ‘RESET’ button must always be pushed in (engaged) for correct operation.

The power supply cord must be replaced if it fails to reset when the ‘TEST’button is pushed in.

If the power supply cord is damaged, it cannot be repaired.It must be replaced with a new cord obtained from the Product Manufacturer.

The power cord supplied with this air conditioner contains a device that senses damage to the power cord.To test if your power supply cord is working properly . you must do the following;

1.Connect the power supply cord to an electrical outlet.

2.The power supply cord is inclusive of two buttons located on the head of the plug. One button is marked ‘TEST’, the other button is marked’RESET’. Press the ’TEST’ button,you will hear a click as the ‘RESET’ button pops out.

3.Press the ‘RESET’ button, you will hear a click as the button engages.

4.The power supply cord is now energized and supplying electricity to the air conditioner.(On some products this is also indicated by a light on the plug head).

3

Page 4
Image 4
Danby DAC7037M manuel dutilisation Electrical Specifications

DAC7037M specifications

The Danby DAC7037M is a powerful and efficient window air conditioner that offers reliable cooling solutions for residential spaces. With a cooling capacity of 7,000 BTUs, it is well-suited for rooms up to approximately 350 square feet, making it an ideal choice for bedrooms, living rooms, and small offices.

One of the standout features of the DAC7037M is its energy efficiency. It boasts an Energy Efficiency Ratio (EER) rating that enables users to enjoy a comfortable environment while keeping energy consumption and costs low. The unit is designed to be environmentally friendly, using R32 refrigerant that has a low global warming potential, making it a responsible choice for eco-conscious consumers.

The DAC7037M also comes equipped with a programmable digital thermostat, allowing users to set their desired temperature with precision. The included remote control makes it convenient to adjust settings from across the room, and the 24-hour programmable timer ensures that the unit operates only when needed, enhancing energy savings. Users can also take advantage of multiple cooling and fan speeds, including a dehumidification mode, to optimize comfort for various conditions.

Installation of the DAC7037M is straightforward, thanks to the included window installation kit. Its compact design allows for a seamless fit in standard windows, with adjustable side panels to enhance coverage. The unit also features a washable air filter, which helps maintain air quality and prolong the life of the air conditioner by reducing dust and allergens.

Additionally, the unit operates quietly, which is especially important for homeowners looking for a peaceful atmosphere. The sound level is kept under control, making the DAC7037M suitable even for nighttime use without disturbing sleep.

In summary, the Danby DAC7037M is a user-friendly, efficient, and powerful air conditioning solution. Its combination of reliable cooling performance, energy efficiency, and advanced features makes it a noteworthy choice for anyone looking to enhance their indoor comfort during the warmer months. With the DAC7037M, users can expect a balance of comfort, convenience, and cost-effectiveness in their home cooling solutions.