IMPORTANT SAFETY INFORMATION
READ ALL SAFETY INFORMATION BEFORE USING
GROUNDING INSTRUCTIONS |
| ENERGY SAVING TIPS |
|
|
|
This appliance must be grounded. In the event of an electri- cal short circuit, grounding reduces the risk of electrical shock by providing an escape wire for the electrical current.
This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.
WARNING:
Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or serviceman if the grounding instructions are not com- pletely understood or if doubt exists as to whether the appliance is properly grounded.
DO NOT USE AN EXTENSION CORDUse an exclusive wall outlet. Do not connect your refrigerator to extension cords or together with any other appliance in the same wall outlet. Do not splice the cord.
IMPORTANT WARNING: An empty refrigerator is a very dangerous attraction to children. Remove either the gasket, latches, lids or doors from unused appliances, or take some other action that will guarantee it harmless.
DANGER: Risk of Child Entrapment! Before you throw away your old refrigerator/freezer:
•Take off the doors.
•Leave the shelves in place so that children may not easily climb inside.
DON’T WAIT! DO IT NOW!
Try not to open the door too often, especially when the weather is hot and humid. Once you open the door, close it as soon as possible.
Every now and then check if the appliance is sufficiently ven- tilated (adequate air circulation behind the appliance).
Set the thermostat from cooler to warmer settings as soon as possible (depends on how loaded the appliance is, ambient temperatures etc.)
Before loading the appliance with packages of fresh foods, make sure that they are cooled to ambient temperature. (excluding soups)
Ice and frost layers increase energy consumption, so clean the appliance as soon as the frost layer is
If the gasket is damaged or the door seal is poor, energy consumption is substantially higher. To restore efficiency, replace the gasket.
Always consider instructions stated in sections Positioning and Energy Saving Tips, otherwise the energy consumption is substantially higher.
BEFORE FIRST USE
Before connecting the appliance to an electrical power supply, let it stand for about 2 hours, which will reduce the possibility of malfunctions in the cooling system due to trans- port handling.
Clean the appliance thoroughly, especially in the interior (See
Care and Maintenance section).
INSTRUCTIONS FOR USEThese instructions for use are intended for the user. They describe the appliance and the correct operating procedures for safe use.
SAVE THESE INSTRUCTIONS
1
