Danby DBC120BLS warranty Troubleshooting, Problem, Possible Cause, Solutions, No Power, too high

TROUBLESHOOTING

PROBLEM	POSSIBLE CAUSE	SOLUTIONS
1) No Power	• A fuse in your home may be	• Replace fuse or reset circuit if
	broken, or a circuit breaker tripped.	needed.
	• Power surge.	• Unplug and wait a few seconds,
	• Plug not fully inserted into wall	then plug the unit back in.
		• Make sure plug is fully inserted.
	outlet.
2) Cabinet temperature	• Temperature setting too high.	• Adjust the temperature setting as
too high.	• Door not shut properly or opened	needed.
		• Ensure that the door is fully
	excessively.	closed or opened excessively and
		that the gaskets are sealing.against
		the cabinets.Open the door only as
		needed and for short periods of
		time.
3) “Clicking” noise.	• Recently added large quantity of	• Limit the quantity of warm cans
	warm cans to the cabinet.	being introduced into the cabinet at
		one time.
	• This is normal	• No user intervention is required as
		this sound is normal during the
		operation of the appliance.This
		audible ‘clicking’noise may be
		heard as the appliance ends or
		begins a cooling cycle.
4) Condensation on the	• High humidity conditions in the	• The condensation will subside
cabinet and/or door.	home.	once humidity conditions return to
	• Door not shut properly or opened	normal.
		• Ensure that the door is fully
	excessively.	closed or opened excessively and
		that the gaskets are sealing against
		the cabinets.Open the door only as
		needed and for short periods of
		time.

If none of the above rectify the situation please contact our customer care department at

1-800-26- (1-800-263-2629)

7