Danby DCR059WE, DCR059BLE warranty Installation Instructions, Door Reversal, Fig. A Fig. B

INSTALLATION INSTRUCTIONS

DOOR REVERSAL	CAUTION: To avoid personal injury to yourself and/or property, we
INSTRUCTIONS	recommend someone assist you during the door reversal process.

1)To access the lower hinge assembly, tilt back the cabinet or lay the refrigerator on its back. (Fig. A)

2)Remove both leveling legs located at the front of the cabinet.

3)Remove the screws holding the lower hinge assembly to the cabinet.

4)Remove the main door assembly from the cabinet (lift door slightly and pull downward).

5)Using a flat heat screwdriver, remove the main door top hinge pin. (Fig. B)

6)Re-install the main door top hinge pin on the opposite side of the cabinet.

7a) Remove the door plug and door bushing located on the top of the main door.

7b) Interchange their positions (eg. door plug right side, door bushing left side).

8)Re-install main door assembly on cabinet.

9)Remove door bushing (bottom door) and install on opposite side.

10)Re-install the lower hinge assembly on the opposite side.

11)Make sure the door assembly is properly aligned on the cabinet before tightening lower hinge screws.

12)Re-install both leveling legs.

The process is now complete.

Fig. A

Fig. B

3