OPERATING INSTRUCTIONS
DRAINING
EXCESS WATER
1)Drain excess water from the tank by placing a pan under the drain water outlet (Fig. 4)
2)Remove the drain plug and let the water drain into the pan.
3)When the water stops draining out, replace the drain plug, and put the tube back in with the clip pointing up.
4)Remove the pan of water.
5)Operate the unit in Fan mode to dry the interior of the unit.
Fig. 4
AIR CONDITIONING
Important: The exhaust hose must be properly vented outdoors during air conditioning mode.
1)Press the 
POWER SWITCH key (Fig. A) to switch the unit on, and the previous set temperature will be shown in the temperature display area of the control panel.
Fig. A
2)Press the MODE key (Fig. B) until the COOL indicator light illuminates on the control panel (Fig. C). Each depression of
the MODE key will advance to a different mode setting
(Cool
- Dehumidify
- Fan
- Auto
)
3)Press the appropriate increase or decrease buttons (Fig. D) to select a suitable operating temperature setting. Temperature settings are adjustable between 16°C (61°F) to 32°C (89°F)
4)Press the FAN key (Fig. E) to select the desired fan speed setting (High
- Med.
- Low
- Auto ). Your selection will appear on the control panel (each depression of the fan key will advance to a different setting as shown in Fig. F).
•Cooling stops automatically when the set temperature is achieved. Cooling resumes when the room temperature rises above the set temperature level.
Fig. B
Fig. C
Fig. D
Fig. E
Fig. F
8
