INSTALLATION
ELECTRIC SHOCK HAZARD: To avoid WARNING the possibility of personal injury, disconnect
power to the unit before installing or servicing.
INSTALLATION ACCESSORIES (FIG. 1)
Flexible Exhaust Hose (13cm) & Exhaust nozzle connector (2 pcs)... from 17 7/10 (45cm) up to 53 1/6”(135cm) Adjustable window door slider kit (3 pcs)..... from 28
1/3”(72cm) up to 80” (203cm)
Fixture | (2 pcs) |
Screws...(8 pcs)
NOTE: The exhaust/window kit must be installed at all times when the unit is operating under AIR CONDITIONING mode.
Fig. 1 INSTALLATION ACCESSORIES
Flexible Exhaust Hose |
| Fixture |
|
|
|
Exhaust Nozzle
Connector
Screws
Adjustable Window Slider Kit: 28 1/3” (72cm)- 80” (203cm)
IMPORTANT
There should be at least 11.8” (30cm) clearance between the unit and any other objects or building structures, and should be installed on a level surface. The unit does not have to be vented outside during Dehumidifying or Fan Only mode operation.
INSTRUCTIONS FOR ASSEMBLING THE WINDOW ADAPTER KIT (FIG. 2).
a)Insert tube adapters through the back of the window panel.
b)Secure each tube adapter with four screws through the front of the window panel.
c)Insert window panel extensions into the window panel. Lightly tighten the screws in the window panel to hold the extensions in place.
Fig. 2 |
|
Back of | |
| Window Panel |
|
|
Tube Adapters
WINDOW KIT | Your window kit has been designed to fit most standard “vertical”/”horizontal” windows up to |
INSTALLATION | a maximum height of 80” (203cm).For vertical window applications, multi lock positions are |
provided on the edge of each slider section to secure each sliding section together. |
1)Select a suitable location, making sure you have access to an electrical outlet.
2)Install the flexible hose to the rear side of the unit. Insert the hose collar on top of the exhaust opening and twist to lock into position.
3)Install the adjustable Window Slider Kit as required (see Fig. 3a & 3b).
4)Install the opposite end of the flexible exhaust hose into the window exhaust adapter.
5)Install the window exhaust adapter into the opening in the slider section, making sure the window slider sections are secure.
6)Plug the unit into a 115V/60Hz grounded electrical outlet.
Fig. 3a
HORIZONTAL
Window Slider Kit:
Min.: 26 5/8” (67.5cm)
Max.: 80” (203cm)
Fig. 3b
VERTICAL
Window Slider Kit:
Min.: 26 5/8” (67.5cm)
Max.: 80” (203cm)
5
