Danby DUF408WE Features, Refrigerated Shelves 2 full width refrigerated shelves, Door Bins

Features

1.THERMOSTAT DIAL: For controlling the temperature inside the freezer. Turns the motor on as soon as the temperature rises above the desired level.

2.REFRIGERATED SHELVES: 2 full width refrigerated shelves.

3.MAGNETIC GASKET: Tight fitting door seal keeps all the cooling power locked inside. No hooks or latches.

4.DOOR BINS (3)

5.DRIP TRAY

3

1

4

2

5

DOOR REVERSAL INSTRUCTIONS CAUTION: To avoid personal injury to yourself and/or property, we recommend someone assist you during the door reversal process.

1.To access the lower hinge assembly, tilt back the freezer cabinet or lay the freezer on its back. (Fig. C)

2.Remove both leveling legs located at the front of the cabinet.

3.Remove the screws holding the lower hinge assembly to the cabinet.

4.Remove the main door assembly from the freezer cabinet. (lift door slightly and pull downward)

5.Using a flat heat screwdriver, remove the main door top hinge pin. (Fig. D)

6.Re-install the main door top hinge pin on the

opposite side of the cabinet.

7a. Remove the door plug and door bushing located on the top of the main door.

7b. Interchange their positions. (eg. door plug right side, door bushing left side.)

8.Re-install main door assembly on cabinet.

9.Remove door bushing (bottom door) and install on opposite side.

10.Re-install the lower hinge assembly on the opposite side.

11.Make sure the door assembly is properly aligned on the cabinet before tightening lower hinge screws.

12.Re-install both leveling legs. The process is now complete.

Fig. C

Fig. D

2