Reverse Door (optional on some models)
IMPORTANT: If you want to reverse your door so that it opens in the opposite direction, continue with “Reverse Door (optional on some models)” instructions. If you are not reversing the door, see “Replace Door and Hinges.”
Cabinet
1.Remove the cabinet hinge hole plugs from the cabinet top and move them to the opposite side hinge holes as shown in Graphic 2.
2.Remove the door stop screws from the Bottom Hinge bracket. See Bottom Hinge graphic 1C
3.Remove the Hinge Pin Nut and Hinge Pin from the hinge bracket.
4.Rotate the hinge bracket for installation on the opposite side of the cabinet. See Graphic 3
5.Reinstall the Hinge Pin Nut and Hinge Pin to the hinge bracket. Hinge Pin must point “up” when hinge bracket is installed to the cabinet.
6.Invert the door stop so that the countersunk holes line up with the screw holes in the hinge assembly. See Graphic 4
7.Reinstall the door stop screws. See Graphic 3.
8.Reinstall the hinge bracket to the cabinet with the three hex head hinge screws.
Replace Door and Hinges
NOTE: Graphic may be reversed if door swing is reversed.
1.Replace the parts for the bottom hinge as shown and tighten screws. See Bottom Hinge graphic 1C. Replace the freezer door.
NOTE: Provide additional support for the door while the hinges are being moved. Do not depend on the door magnets to hold the door in place while you are working.
2.Assemble the parts of the top hinge as shown in the Top Hinge graphic 1B. Do not tighten the screws completely.
3.Line up the door so that the bottom aligns evenly with the cabinet. Tighten all screws.
Final Steps
1.Check all holes to make sure that hole plugs and screws are in place. Reinstall top hinge cover. See Top Hinge graphic 1B.
2.Replace the base grille. See Base Grille graphic 1A.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
3.Plug into a grounded 3 prong outlet.
4.Reset the control. See “Using the Control.”
5.Return all removable door parts to door and food to freezer.
6
