OPERATINGINSTRUCTIONS (cont’d)
OPERATING |
| 3 | 4 | 5 | 6 | 7 |
THE CONTROLS |
|
|
|
|
| |
|
|
|
|
|
| |
1 | 2 |
|
| Upper chamber | Lower chamber |
|
POWER LIGHT | RUN |
Activation
Set Upper
REGLER SUPÉRIEURE
Set Lower
REGLER INFÉRIEURE
1)Power ON/OFF switch.
2)Interior lights ON/OFF switch(while the door stays closed)
3)Run: Indicator light illuminates to signify that the cooling mode is currently in operation
4)Upper chamber display: Display screen shows current cabinet temperature and set temperature of the upper zone.
5)Lower champer display: Display screen shows current cabinet temperature and set temperature of the lower zone.
6)°C/°F: Adjacent indicator light denotes which scale of temperature is displayed.
7)‘Set Upper’ button: Used to set the temperature in the upper zone (see ‘Setting the Temperature’ below).
‘Set Lower’ button: Used to set the temperature in the lower zone (see ‘Setting the Temperature’ below).
SETTING THE
TEMPERATURE In the event of a power failure, wait 3 to 5 minutes before restarting
•To switch the display between the Fahrenheit (°F) and Celsius (°C) scale, depress the ‘Set Upper’ and ‘Set Lower’ control buttons simultaneously for approximately five (5) seconds.
•The temperature range can be set as low as 39°F (4°C) or as high as 64°F (18°C) to suit your specific beverage requirements. Each depression of the ‘Set Upper’ or ‘Set Lower’ button will allow you to adjust the temperature in 1° increments within the aforementioned range.
•You may view your ‘set’ temperature at any time by briefly depressing either the ‘Set Upper’ or ‘Set Lower’ button. The set temperature will flash in the display area for 5 seconds before the display resumes showing the current cabinet temperature.
STORAGE
5
