Danby DWC518BLS Trouble Shooting, Before you call for service, Problem, Possible Cause, No Power

Trouble Shooting

Before you call for service

Problem	Possible Cause	What to do
No Power.	A fuse in your home may	Replace fuse or reset circuit breaker.
	be blown or the circuit
	breaker tripped.
	Power surge.	Unplug the wine cooler, wait a few
		seconds and then plug it back in.
	Plug not fully inserted into	Make sure the 3-prong plug is fully
	wall outlet.	inserted into outlet.
Cabinet Temperature	Temperature setting.	Verify the temperature control setting.
too High.		adjust if neccessary.
	Door not shut properly	Ensure that the door is fully closed
	or opened excessively.	and that the gasket is sealing. against
		the cabinets. Open the doors only as
		needed and for short periods of time.
	Interior lights toggled on.	The interior lights are intended for
		temporary lighting of cabinets for
		display purposes only. They are not
		intended to be left on for prolonged
		time periods.
	Exhaust vent is obstructed.	Verify there is nothing blocking the
		front mounted exhaust vent.
	Recently added a large	Limit the quantity of warm bottles
	quantity of warm bottles	being introduced to the cabinet at the
	to the cabinet.	same time. Attempt to stagger the
		load introduction if possible.
Condensation on the	High humidity conditions	The condensation will subside once
cabinet and/or doors.	in the home.	humidity conditions return to normal.
	Door not shut properly	Ensure that the door is fully closed
	or opened excessively.	and that the gasket is sealing against
		the cabinets. Open the door only as
		needed and for short periods of time.

If none of the above rectify the situation please contact our customer care department

at 1-800-26- (1-800-263-2629)

10