Video Operations
Playing Video Sources
Note:
When playing videos that feature surround sound, refer to "Available Surround Modes".
1Select the DVD, VIDEO 1, VIDEO 2, AUX 1, AUX 2 mode by pressing the SOURCE(6/n) button
2Play the component corresponding to the FUNCTION selected.
3The picture from the video source can be seen on the TV and the sound from the video source will be heard from the speakers.
Video Camera Connections
VCR, Video Camera Recorder, etc.
Connect the video camera recorder's AUDIO OUT- PUT to the AUDIO (L)/(R) jacks and VIDEO OUT to the VIDEO jack of the AUX 2 INPUT.
System Configuration
(OSD - On Screen Display)
Before using the unit, you will probably want to change the settings for most inputs so that they are properly configured to reflect the use of digital or analog inputs, the type of speakers installed and the surround mode specifics of your home theater system. Remember that since the
Making Configuration Adjustments
1If another function is selected, press the AMP but- ton.
2Press the OSD button.
The MAIN MENU will appear, and adjustments are made from the individual menus. The menus will remain on the screen for 20 seconds.
3Select an item you want to change using the 5/b buttons.
4Press the ENTER button.
5Press the t button repeatedly until the setting you want to select appears.
AMP
OSD
ENTER
Video Tape Dubbing
2
1Press the SOURCE(6/n) button to select the VIDEO source to be recorded.
2Playback the source.
3Operate VID 1 or VID 2/VCR for recording.
Video/audio signals from the selected VIDEO source can be dubbed to VID 2/VCR only.
MAIN MENU 
FUNCTION | SETUP |
SURROUND | SETUP |
SPEAKER | SETUP |
DISTANCE | ADJUST |
CH LEVEL | ADJUST |
PREFERENCE | SETUP |
ZONE II | SETUP |
ROOM AUTO | SETUP |
- 25 -
