Loading
Ticket Stock
¾ ST Models only: Unlock the Access ¾ Install Ticket Stock and insert it between the Media Guides. Cover then lift to open (for
convenience, the cover may be removed by sliding it forward and then lifting up).
¾Adjust the Media Guides to fit the Ticket Stock, then tighten the Thumbscrew to secure.
¾Turn ‘On’ the Power Switch.
¾Slide the media through the Media Guides, continue until the printer grabs the media and automatically completes the loading process.
;Note: When loading, ensure that the black marks on the ticket stock face away from you. If the ticket stock does not feed to the proper position, the Media Sensor may need adjustment (see Section 4 of the Operator’s Manual for instructions).
Printing a
Configuration
and Test
Pattern Ticket
¾With the Power Switch turned ‘Off’ and ticket stock loaded, press and hold the FEED Button while turning the Power Switch ‘On.’ Continue to depress the FEED Button until printing begins.
¾After printing is complete, cycle the Power Switch ‘Off’ and ‘On’ to return the printer to the normal operating mode.
;Note: The printer maintains a selection of
Additional
Information
Be sure to follow and perform the suggested cleaning schedule explained in the Operator’s Manual.
Contacting Datamax…
Corporate Headquarters | (407) |
Technical Support | (407) |
For the latest products, news, and
support visit our web page at
www.datamaxcorp.com
