Datavideo ITC-100 KF1000 ITC-100 Tally Input Pin Cross Reference, Video Red LED Amber LED, On Air

ITC-100 Tally Input - Pin Cross Reference

If you are using the ITC-100KF1000 with a Datavideo SE-1000 via a TB-10 you do not need to worry about tally information, as it is automatically sent to the ITC-100 KF1000. If you are using the ITC-100 with other equipment the following tables explain the pin configurations of Tally A and Tally B.

Contact closure between the relevant Pin number and ground will illuminate the LED. For example on Tally A, if Pin 1 is connected to Pin 4 the RED LED will light up on Channel 1; if Pin 13 is connected to Pin 4 the AMBER LED will light up on Channel 3

Tally A Input

The Tally A Input will send Tally Information to Channels 1 ~ 4. The following table shows the pin numbers for each channel:

Video	Red LED	Amber LED
	LIVE	CUED
Channel
	(On Air)	(Next)
1	Pin 1	Pin 3
2	Pin 6	Pin 8
3	Pin 11	Pin 13
AUX 1	Pin 5	Pin 15

Pins 4, 9 and 14 can be used as ground.

Tally B Input

The Tally B Input will send Tally Information to Channels 5 ~ 8. The following table shows the pin numbers for each channel:

Video	Red LED	Amber LED
	LIVE	CUED
Channel
	(On Air)	(Next)
4	Pin 1	Pin 3
5	Pin 6	Pin 8
6	Pin 11	Pin 13
AUX 2	Pin 5	Pin 15

Pins 4, 9 and 14 can be used as ground.

10