Using WT3 to Measure a Tweeter's Parameters

A typical sealed back moving coil tweeter operates as a very small closed box system and therefore can be characterized by it's closed box resonance and Q, F(sc) and Q(tc). You can use WT3 to measure both of these parameters for tweeters as well as woofers and midranges. The frequency response of a tweeter is the same as that of a purely electrical second order high-pass filter with the same electrical resonance frequency and Q as the tweeter's electro-acoustic resonance and Q. While the resonance frequency determines the low frequency bandwidth of the tweeter, the Q(tc) determines the shape of the response in the corner region with Q = .707 corresponding to a maximally flat Butterworth response.

The impedance response of a tweeter operating as a closed box loudspeaker has a single well defined peak at the tweeter's primary resonance frequency at the low end of the tweeter's operating range.

Before starting, make sure the WT3 unit has been calibrated and has stabilized for at least 90 seconds.

Measure the tweeter's impedance as follows:

•Launch the WT3 software and make sure the volume is at maximum.

•Under the Edit menu select Preferences and set the L(e) Measurement Frequency to 10 kHz.

•Make sure that the tweeter is not connected to any other equipment and then connect the test leads of the WT3 unit to the tweeter under test.

•Click the "Measure Free Air Parameters" button at the left side of the WT3 screen.

•You should hear the sweep from the tweeter, the impedance is plotted and the parameters are displayed.

•The tweeter's equivalent closed box resonance frequency, F(sc) is displayed in the F(s) data field.

•The tweeter's equivalent closed box total Q, Q(tc) is displayed in the Q(ts) field.

•Save the equivalent closed box data to a memory for future reference.

•The DC resistance of the tweeter is displayed in the R(e) field. Ignore all other parameters.

•Repeat the measurement to confirm the result. Repeated measurements should be in good agreement.

Page 26 Page 28
Page 27
Image 27
Dayton manual Using WT3 to Measure a Tweeters Parameters
Page 26 Page 28

WT3 specifications

The Dayton WT3 is a sophisticated and highly regarded tool in the field of audio measurement and analysis, particularly known for its precision in loudspeaker testing. This comprehensive device integrates several advanced features and technologies, making it an essential choice for audio professionals, engineers, and hobbyists alike.

One of the standout characteristics of the Dayton WT3 is its dual-channel capability, allowing users to conduct simultaneous measurements of two different loudspeakers. This feature is particularly useful in stereo systems where matching drivers is essential. The WT3 utilizes a high-resolution analog-to-digital converter (ADC) that ensures accurate and detailed frequency response measurements, providing users with the data they need to refine and optimize their audio setups.

The WT3 is equipped with a user-friendly interface that simplifies the measurement process. Its software is intuitive and runs on Windows, which means that users can easily navigate through various options to configure tests and analyze results. The inclusion of a built-in microphone makes it possible to perform room acoustics measurements, further enhancing its versatility.

Another key technology integrated into the Dayton WT3 is its frequency sweep capability. By generating continuous sine wave sweeps across a wide frequency range, the WT3 can analyze the response of loudspeakers in real-time. This allows for identifying resonances, distortion, and other critical parameters that affect sound quality.

The WT3 also features a range of measurement modes, including impedance measurements, which can be invaluable for understanding how a loudspeaker behaves across different frequencies. This data is displayed in easy-to-read graphs and charts, facilitating a straightforward interpretation of results.

Moreover, the Dayton WT3 utilizes advanced signal processing algorithms that help in reducing noise and other unwanted artifacts that can skew measurements. The device's accurate phase response measurement capability further distinguishes it from competitors, providing essential data for crossover design and speaker alignment.

In summary, the Dayton WT3 combines advanced measurement technology with an intuitive user experience, making it an essential tool for those seeking precise loudspeaker performance insights. Its features and capabilities position it as a valuable asset for both professional audio engineers and enthusiasts dedicated to achieving the best possible sound quality. Whether for designing new speakers or optimizing existing setups, the WT3 delivers reliable performance and accuracy.
Top Page Image Contents