DCM Speakers TO52-B owner manual Installation, TO82-B, Fixed Install, Specifications

Specifications:

TO52-B

Frequency Response (± 3 dB)	85 Hz to 20 kHz
Usable Low Frequency Limit	65 Hz
(10dB Down Point)
Power Handling (RMS/Peak)	100W / 150W
Sensitivity (1W/1M)	90dB
Nominal Coverage Angle	90°H X. 90°V
Transducer Complement
High Frequency	Dome Tweeter
Low Frequency	5 1/4” Hycone Treated Woofer
Crossover Frequency	4.5 kHz
Crossover Slope	12 dB/ Octave
Impedance	8 ohm
Input Connections:	(1) 1/4” Phone Jack and (1) 5-way Touch Proof
	Binding Post
Driver Protection (High Frequency)	PTC Protected
Materials	UV-Resistant Talc Impregnated Polypropylene
	Injection Molded Weatherproof Enclosure (Black
	Finish)
	Perforated Powder Coated Aluminum Grille
	matches enclosure color
Weight (Less Bracket)	7.05lbs. (3.2kg)
Dimensions (Less Bracket)	10 3/16” (25.8cm)H X 6 7/8” (17.5cm)W X 5 7/8”
	(14.85cm)D

TO82-B

Frequency Response (± 3 dB)	65 Hz to 20 kHz
Usable Low Frequency Limit	51 Hz
(10dB Down Point)
Power Handling (RMS/Peak)	150W / 225W
Sensitivity (1W/1M)	92dB
Nominal Coverage Angle	65°H X. 65°V
Transducer Complement
High Frequency	1” Exit Compression Driver
Low Frequency	8” Hycone Treated Woofer
Crossover Frequency	2.2 kHz
Crossover Slope	12dB/ Octave
Impedance	8 ohm
Input Connections	(1) 1/4” Phone Jack and (1) 5-way Touch Proof
	Binding Post
Driver Protection (High Frequency)	PTC Protected
Materials	UV-Resistant Talc Impregnated Polypropylene
	Injection Molded Weatherproof Enclosure. (Black
	Finish)
	Perforated Powder Coated Aluminum Grille
	matches enclosure color
Weight (Less Bracket)	16.32lbs. (7.4kg)
Dimensions (Less Bracket)	16 1/2” (41.9cm)H X 9 1/16” (23.0cm)W X
	8 7/16” (21.49cm) D

Ceiling Ht: 15’	Spkr Spacing: 25’	Max SPL @ 30W (Listener@3.5’)	94dB
Ceiling Ht: 16’	Spkr Spacing: 30.5’	Max SPL @ 30W (Listener@3.5’)	93dB
Ceiling Ht: 17’	Spkr Spacing: 33’	Max SPL @ 30W (Listener@3.5’)	93dB
Ceiling Ht: 18’	Spkr Spacing: 35.5’	Max SPL @ 30W (Listener@3.5’)	92dB
Ceiling Ht: 19’	Spkr Spacing: 38’	Max SPL @ 30W (Listener@3.5’)	92dB
Ceiling Ht: 20’	Spkr Spacing: 40.5’	Max SPL @ 30W (Listener@3.5’)	91dB

TO82-B =100o nominal coverage (50o off axis) at 2 kHz

Ceiling Ht:	8’	Spkr Spacing: 7.5’	Max SPL @ 30W (Listener@3.5’)	107dB
Ceiling Ht:	9’	Spkr Spacing: 9.5	Max SPL @ 30W (Listener@3.5’)	106dB
Ceiling Ht: 10’		Spkr Spacing: 11’	Max SPL @ 30W (Listener@3.5’)	104dB
Ceiling Ht: 11’		Spkr Spacing: 12.5’	Max SPL @ 30W (Listener@3.5’)	103dB
Ceiling Ht: 12’		Spkr Spacing: 14.5’	Max SPL @ 30W (Listener@3.5’)	102dB
Ceiling Ht: 13’		Spkr Spacing: 16’	Max SPL @ 30W (Listener@3.5’)	101dB
Ceiling Ht: 14’		Spkr Spacing: 17.5’	Max SPL @ 30W (Listener@3.5’)	100dB
Ceiling Ht: 15’		Spkr Spacing: 19.5’	Max SPL @ 30W (Listener@3.5’)	99dB
Ceiling Ht: 16’		Spkr Spacing: 21’	Max SPL @ 30W (Listener@3.5’)	98dB
Ceiling Ht: 17’		Spkr Spacing: 22.5’	Max SPL @ 30W (Listener@3.5’)	98dB
Ceiling Ht: 18’		Spkr Spacing: 24.5’	Max SPL @ 30W (Listener@3.5’)	97dB
Ceiling Ht: 19’		Spkr Spacing: 26’	Max SPL @ 30W (Listener@3.5’)	97dB
Ceiling Ht: 20’		Spkr Spacing: 28’	Max SPL @ 30W (Listener@3.5’)	96dB
Ceiling Ht: 25’		Spkr Spacing: 36’	Max SPL @ 30W (Listener@3.5’)	94dB
Ceiling Ht: 30’		Spkr Spacing: 44.5’	Max SPL @ 30W (Listener@3.5’)	92dB

Installation

Fixed Install:

The DCM Time Out Speaker systems include a versatile yet simple U-bracket designed to provide easy vertical or horizontal installation on just about any surface. The speaker may be installed using screws or bolts placed through the “L” shaped holes in the mounting bracket. The center 5/8”-27 hole allows wires to exit through the bracket when wall mounting, for a neat installation. The unused inserts on the bottom of the cabinet (TO82-B) or rear of the cabinet (TO52-B) may be used with standard 1/4”-20 forged eyebolt and an approved safety cable (wire rope sling) where redundant support is required for seismic considerations. These parts are available through many sources including Grainger Corporation. (www.Grainger.com).

Size 21, 1/4” X 1” Forged Eyebolt- Grainger Part Number: 2G692

Galvanized Steel Cable Spool, 1/8”- Grainger Part Number: 4KH26

Sleeve N ThimbleTM Kit for 1/8” Cable, -Grainger Part Number: 4KH28

Swage It Tool for 1/16”, 3/32”, and 1/8”- Cable Size- Grainger Part Number: 4KH08

The mounting knobs included with the speaker product may be easily interchanged with standard, 1/4”-20 vandal proof hardware. Grainger Corporation is also a good source for torx head, spanner head or one-way security bolts. (www.Grainger.com)

TORX Drive Button Head 1/4” Machine Screw, Tamperproof, 1/2” Length- Grainger Part Number: 5JD16

One-Way Round Head 1/4” Machine Screw, Tamperproof, 1/2” Length- Grainger Part Number: 5JC82

Spanner Flat Head 1/4” Machine Screw, Tamperproof, 1/2” Length- Grainger Part Number: 5JC94

When you have an installation challenge that the U-bracket will not accommodate, we suggest you contact our friends at OMNIMOUNT systems (www.omnimountsyste