Overhead Suspension, Painting the Speakers

ms.com) to select one of their quality swivel mount products (25 Series for TO52-B, 75 Series for TO82-B).

Overhead Suspension:

Caution: Suspending any object is potentially dangerous and should be attempted only by individuals who have a thorough knowledge of the techniques and regulations

nected. Most consumer amplifiers are rated to operate at a 4 ohm minimum output impedance per channel (Check the back panel of the amplifier or the amplifier owners manual to verify). With this arrangement, (2) TO52-B/TO82-B speakers may be con- nected in parallel to each channel of the amplifier (two 8 ohm speakers per channel= a 4 ohm load). (See Fig. 1).

of rigging objects overhead using ONLY hardware approved for this type of installation. DCM strongly recommends that surface mount enclosures only be suspended over- head when taking into account all current national, federal, state, and local regulations. It is the responsibility of the installer to insure that the speaker is installed according to those regulations. If the speaker is suspended, DCM strongly recommends that the system be inspected at least once a year. If any sign of weakness or damage is detected, remedial action should be taken immediately.

Near Field Live Sound Monitoring

A standard 5/8”-27 thread insert is included on the U-bracket to facilitate mounting on Atlas Sound microphone stands for use as a near-field live sound monitor.

	INPUT
	LEFT
FIG. 1	+ -
	+ -
+	+
-	-

RIGHT

AMPLIFIER 4 OHMS PER CHANNEL

- +

4 OHMS EACH CHANNEL

Painting the Speakers:

The injection molded, polypropylene, talc impregnated cabinets can be painted to match your decor. You should prime the cabinet with two coats of a product such as KrylonTM Sandable Spray Primer #1318. You may use oil or water based house paint or spray paint. (Be sure to use appropriate exterior house paint for outdoor applica- tions).

1.Remove the grilles and brackets

2.Mask the speaker components and input terminals area with newspaper and mask- ing tape.

3.Apply two thin primer coats to the speaker cabinets and knobs. (The brackets do not require a primer coat.)

4.After the primer coats are completely dry, paint the cabinets, brackets and knobs. Be careful not to paint the input terminals.

Painting the Grilles:

Remove and paint the grilles before inserting them onto the frames:

TO52-B:Using a paper clip bent into a “hook” shape, insert it into a grille near the corner and pull the grille away from the cabinet.

TO82-B:Remove all screws around the outside of the grille to remove the grille from the cabinet.

Apply (2) thin coats of paint (primer is not required) be careful not to let the paint clog the holes in the grilles.

Connections:

TO52-B/TO82-B

The TO52-B and TO82-B loudspeakers include (1) 5-way binding post and (1) 1/4” phone jack. Both inputs are paralleled together to allow daisy chaining with the two- connector types. The binding post is designed to accept up to 12#awg stranded cable or standard MDP style banana plugs.

Amplifier limitations will dictate how many TO52-B/TO82-B speakers may be con-

8 Ohms

Be sure to use a good quality, unshielded twisted pair speaker cable to connect the amplifier to the speaker(s) (#14AWG for runs <80’, #12AWG for runs >80’).

Standard ZIP style speaker cable may also be used if twisted pair cable is not avail- able.

DO NOT USE SHIELDED INSTRUMENT STYLE (Guitar) CABLES TO CONNECT SPEAKERS.

When making the connections, be sure to maintain proper polarity between speak- ers. (Red wire to red terminals- black wire to black terminal where applicable).

Maintenance and Care

Your DCM Time Out loudspeakers have been designed and manufactured for years of trouble-free service. You can clean your loudspeakers with a dampened soft cloth or paper towel. If the speaker is mounted high on a wall or ceiling, use a broom or duster to gently brush it off. Spraying the speaker with a high-pressure water is not recommended.

TO52-B, TO82-B specifications

DCM Speakers has always been known for producing high-quality audio components, and their TO82-B and TO52-B models exemplify this reputation. These speakers are meticulously designed to deliver an immersive sound experience, making them ideal for both home theater setups and music lovers.

The DCM TO82-B is a prominent model featuring a dual 8-inch woofer configuration, which provides deep bass tones without distortion. This is complemented by a 1-inch soft dome tweeter that ensures crisp and clear high frequencies. The TO82-B is engineered with a sophisticated crossover system, which effectively divides the audio signal into different frequency ranges, allowing each driver to perform optimally. This results in a smooth and coherent sound across the entire frequency spectrum, making it perfect for a variety of audio content.

On the other hand, the DCM TO52-B is a more compact option, featuring a single 5.25-inch woofer paired with a similar 1-inch soft dome tweeter. Despite its smaller footprint, the TO52-B does not compromise on sound quality. The design incorporates a bass reflex port, which enhances low-end frequency response and provides a fuller sound in smaller spaces. This makes the TO52-B an excellent choice for apartment living or smaller rooms where space is a concern.

Both models utilize advanced materials in their construction, ensuring durability and longevity. The cabinets are crafted from high-density MDF, which minimizes resonance and unwanted vibrations, resulting in cleaner sound reproduction. Additionally, the speakers are finished with a sleek veneer that not only looks great but also integrates well with any home decor.

Another significant feature of the DCM speakers is their compatibility with a wide range of audio equipment. With an impedance rating of 8 ohms, they can easily pair with various amplifiers and receivers, making them versatile for different audio systems. Whether connecting to a high-end audio setup or a basic stereo system, the TO82-B and TO52-B promise remarkable performance.

In summary, the DCM TO82-B and TO52-B speakers stand out in the crowded market of audio components, offering superior sound quality, innovative technology, and stylish design. Whether you choose the powerful TO82-B for a larger room or the compact TO52-B for a more intimate setting, both models are sure to enhance your listening experience and bring your favorite music and movies to life.

DCM Speakers TO82-B Overhead Suspension, Near Field Live Sound Monitoring, Painting the Speakers

Models: TO52-B TO82-B