Troubleshooting

These troubleshooting procedures must be carried out only by a factory authorized agency for warranty repair. The problems and possible solutions given below cover those most commonly encountered.

PILOT BURNER MALFUNCTION

Pilot will not ignite; no evidence of gas at pilot burner:

●Check that the gas valve is open and gas is present at the valve.

●Check pilot burner adjustment. Adjust the pilot flame to extend above the top of the pilot. Pilot adjustment

screw is located on the front panel between the two burner valves.

●Remove pilot gas supply line and check for dirt. Blow out if necessary and reinstall.

●Check pilot burner orifice for dirt.

Pilot burner ignites but will not remain lit when red button is released:

●Check that the thermocouple lead is firmly screwed into the safety valve.

●Remove end of thermocouple lead from safety valve and clean with fine sandpaper.

●If thermocouple is defective or damaged, replace thermocouple.

●Pilot flame may be too high or too low. Adjust flame by turning pilot flow adjustment screw.

Pilot flame of proper size but unstable. Flame wavers and does not envelop the thermocouple completely at all times:

●Check for drafts which might be caused by air conditioning equipment or make-up air apparatus. Turn these

“OFF” and recheck the pilot.

MAIN BURNER MALFUNCTIONS.

Main burner will not come “ON”, no gas present at main burner:

●Check that the gas valve is open.

●Check that pilot is ignited and is operating properly.

●The safety valve may be defective. Replace if necessary.

Main burner flames are small and appear lazy, Tandoor is not heating up quickly.

●Check gas pressure at the pressure tap on the manifold pipe located behind the front panel. Use a standard

water type U-Gauge manometer. With the burners in operation, the manifold pressure should be 6” W.C. natural gas and 10” W.C. on propane gas. If not, unscrew the cover of the pressure regulator adjustment. Use a screwdriver to turn adjusting screw clockwise to increase gas pressure to burner, counter-clockwise to decrease the pressure. Replace cover and plug.

11

Page 11 Page 13
Page 12
Image 12
DCS CGT manual Troubleshooting, Pilot Burner Malfunction, Main Burner Malfunctions
Page 11 Page 13

CGT specifications

DCS CGT, or Digital Combat Simulator Combined Arms Ground Team, represents a significant advancement in military simulation technology and training. This cutting-edge platform is designed to provide realistic and immersive environments for training ground forces, allowing users to experience various combat scenarios with an unparalleled level of detail and authenticity.

One of the main features of DCS CGT is its high-fidelity graphics engine, which offers stunning visuals that accurately depict a variety of terrains and landscapes. From arid deserts to urban environments, the simulation incorporates realistic terrain modeling, weather effects, and dynamic lighting conditions. This enables users to train in environments that closely resemble real-world combat zones, enhancing preparedness and situational awareness.

DCS CGT's technology stack includes advanced physics modeling and AI-driven opponents, making enemy interactions more compelling and life-like. Soldiers in training can expect to encounter smart AI that reacts to player actions, providing an unpredictable adversarial dynamic. This not only boosts the training experience but also encourages more strategic thinking and adaptability among participants.

Human-computer interaction is enhanced through the use of versatile control systems. Users can engage in ground combat using a variety of vehicles and equipment, from armored personnel carriers to tanks. The simulation allows for detailed vehicle handling, weapon systems integration, and communication protocols, ensuring operators gain first-hand experience working with modern military technologies.

DCS CGT also features multiplayer capabilities, enabling users to collaborate or compete against one another in large-scale operations. This aspect fosters teamwork and communication, essential skills for effective ground operations. Additionally, mission customization tools allow trainers to design scenarios tailored to specific objectives or tactical lessons, providing flexibility in training programs.

Another characteristic of DCS CGT is its integration with other DCS modules, allowing joint warfare training scenarios alongside air and naval units. This integration provides a coalesced view of modern warfare environments, where ground forces must work alongside air support and naval assets for mission success.

In conclusion, DCS CGT is a comprehensive training tool that leverages advanced technologies to create a realistic, immersive, and adaptable combat simulation. With high-fidelity graphics, intelligent AI, versatile control systems, and a focus on teamwork, it equips military personnel with the skills and experience necessary for success in today’s complex battlefields.
Top Page Image Contents