Definitive Technology RSS II Installation Procedure Overview continued, Step-by-StepInstallation

Installation Procedure Overview (continued)

•Speaker wire must be run inside your ceiling as part of the installation process of in-wall loudspeakers. Plan the connection before you start your loudspeaker installation.

Step-by-Step Installation

Mounting options overview

•Installation of this product must follow all local and state building codes. We strongly recommend using a qualified, professional installer who is knowledgeable of local building codes.

•The UIW RSS II is designed to be mounted vertically In-Wall, and either in-line with or at 90° to joists In-Ceiling.

•For In-Ceiling mounting, you will need to shim (or frame in the enclosure) with appropriate framing material along one or both of the long sides of the speaker.

Required cutout and cavity size for In-Wall Installation

•Template cutout size: 115/8"W x 97/8"L.

•Minimum size of cavity required inside wall is as follows:

–Depth: 37/8"

–Height: 137/8"

–Width: 121/8" See Diagram 1, page 10 for reference.

–Width: 11" (where desired location is closer than 11/4" to a stud on one side) See Diagram 2, page 10 for reference.

–Width: 97/8" (where desired location is closer than 11/4" to a stud on two sides) See Diagram 3 & 4, page 11 for reference.

Required cutout and cavity size for

In-Ceiling Installation

•Minimum size of cavity required inside wall is as follows:

–Depth: 37/8"

–Width: 97/8" between joists/framing material on sides with wood screws.

–Height: 137/8" between obstructions at ends where lock arms are to be used (top & bottom ends) (11/4" of space required on each end of the speaker to clear lock arms).

5