Troubleshooting Your In-Wall Loudspeakers
If you experience any difficulties with your Ultimate
•Make sure all your system interconnections and power cords are solidly in their place.
•Check to be sure that the power cords and/or speaker wires have not been damaged.
•Many amplifier/receivers have sophisticated internal protection circuitry. If for some reason the protection circuitry is tripped, please turn down the system’s volume and wait five minutes before trying the system again.
Service
Service and warranty work on your Definitive loudspeakers will nor- mally be performed by your local Definitive Technology dealer. If, how- ever, you wish to return the speaker to us, please contact us first, describ-
ing the problem and requesting authorization as well as the location of the nearest factory service center. Please note that the address given in this booklet is the address of our offices only. Under no circum- stances should loudspeakers be shipped to our offices or returned without contacting us first and obtaining return authorization.
Definitive Technology Offices
11433 Cronridge Dr.
Owings Mills, Maryland 21117
Phone:
Ultimate In-Wall Specifications
UIW 75
Outer Dimensions | 7.5" x 16.625" | (191 mm x 421 mm) |
6.5" x 15.5" | (164 mm x 394 mm) | |
Power | Rec.Assoc.Amp. | |
Frequency Response | 26Hz – 30kHz |
|
Nominal Impedance | 8 ohms |
|
Driver Complement | Two 6.5" cast basket bass/midrange driver; 1" pure aluminum dome tweeter in a | |
| D’Appolito array (the same basic drivers and configuration developed for | |
| Definitive’s Grand Prix Award Winning | |
UIW 65 |
|
|
Outer Dimensions | 7.5" x 10.9" | (191 mm x 277 mm) |
6.5" x 9.8" | (164 mm x 249 mm) | |
Power | Rec.Assoc.Amp. | |
Frequency Response | 28Hz – 30kHz |
|
Nominal Impedance | 8 ohms |
|
Driver Complement | 6.5" cast basket bass/midrange driver; 1" pure aluminum dome tweeter (the same |
basic drivers developed for Definitive’s Grand Prix Award winning
6