Maintenance

Lift-off oven door

The oven door may be removed to improve oven access during cleaning

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Grasp the open door on

 

Flip the retainer clasps up

 

Lift the door upwards and

both sides near the hinges

 

and over the hook on the

 

outwards until it is free of

 

 

upper hinge arm .

 

the hinge housing

 

 

Maintain upward pressure

 

 

 

 

on the door to prevent the

 

After cleaning ,refit the door

 

 

clasps from disengaging

 

in reverse order.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Removing the inner door glass.

•The glass may be removed for cleaning pur-

poses by removing the two screws which hold it in place.

• It is now possible to clean the inside of the outer glass if required.

• Wash the glass in hot soapy water, rinse and dry.

• Re-assemble by carefully locating the rubber

seal in the embossed groove before fitting the glass. The glass is marked

“THIS SIDE TOWARDS OVEN”.

•Re-fit the two securing screws.

Removing the side racks and shelves

• The side racks and shelves may be removed for cleaning purposes.

• Remove the bottom bake element guard.

• Slide the shelf out fully against the shelf stop.

• Lift the shelf slightly and slide it out

•The side racks may be removed by pulling the bot-

tom stay slightly downwards thereby dislodging it from the retainer at the bottom centre. Lift the racks free of the retaining slots in the oven wall.

• Replace in reverse order of disassembly.

11