Before the installer hands over the appliance be sure that you fully understand:

a)The position of the isolation or shut-off valve in the gas supply line to the appliance.

b)The requirements for safe operation of the appliance.

NOTE

This appliance is supplied ex-factory with jets and air settings for use with Liquid Petroleum Gas ( LPG ) only.

Note: A stove without a flame failure device may only be used with a free standing cylinder placed adjacent to but not closer than 300 mm to the stove.

RECORD INSTALLERS DETAILS HERE

3

INSTALLATION BEFORE USE

 

 

Unbox the stove and remove all packaging and protective wrapping.

Adhesive residue may be cleaned off using benzine or alcohol and then rinsed with water. Please ensure that you dispose of the packaging in a responsible manner. Plastic bags should be cut up to prevent children playing with them and accidentally suffocating. Stand the stove on a solid flat and level floor capable of supporting it's weight without flexing.

The stove should be located away from draught, direct sunlight, cooling appliances and any

combustible materials such as curtains and plastic containers.

The stove should have an air gap of at least 50mm. around the back and sides for ventilation purposes and a space of at least 850mm. above the cooking surface. The gas pressure regulator should be accessible and located near the stove.

850mm

50mm

50mm

50mm

3