MAINTENANCE
Cleaning the ovens
•Switch off the power at the wall switch, open the oven door and allow the oven to cool down.
•Remove the oven shelves, side racks, broiler, roast pan and element guard. Wash in soapy water, rinse dry and replace.
•Clean the oven with a hot soapy cloth.
•It may be necessary to soak burnt soils with a liquid cleaner to soften them before scrubbing them with a nylon brush or scouring sponge.
•Heavy soils on the bottom of the oven may require overnight soaking under a sponge liberally sprinkled with
household ammonia. The soil can then be removed the following morning by washing normally.
•Do not use metal objects or steel wool to clean the oven.
•After cleaning, fit the bottom element into the element guard hooks. Failure to observe this precaution would allow the element to rest on and possibly damage the oven enamel.
•Restore the power and
To remove the side
racks, lift and pull out
the front, slide the
rack forwards and lift
free.
Fit in reverse order
General cleaning.
•Switch the power off at the wall switch.
•Wipe down glass panels, cabinet, door, control knobs, trims and handles with a hot soapy cloth.
•Use only liquid household cleaners and avoid abrasive powders, scouring pads and caustic cleaners.
•Rinse and wipe down with a clean cloth.
•Restore the power and
The oven light.
The oven light is switched on by the multi function knob or the oven thermostat knob (depending on model).
(1st position on the dial) and switches off when the multi function knob or thermostat is returned to 0.
To replace a faulty light bulb, proceed as follows.
•Switch off the power at the wall switch.
•Remove the light cover by unscrewing it in an
•Unscrew the faulty bulb and fit a new 40 watt bulb rated for 300 C.
•Refit the light cover.
•Restore the power and
