Defy Appliances DPY 8504 CGM C, C, A

25 / 32 EN

Dryer / User Manual

Service life of product extends and frequently

experienced problems will be reduced if it is cleaned at

regular intervals.

Lint and fiber released from the laundry to the air during

the drying cycle are collected in the Lint Filter.

CSuch fiber and lint are generally formed

during wearing and washing.

AAlways clean the lint filter and the inner

surfaces of the loading door after each

drying process.

CYou can clean the lint filter housing with a

vacuum cleaner.

To clean the lint filter:

• Open the loading door.

• Remove the lint filter by pulling it up and open the

lint filter.

• Clean lint, fiber, and cotton raveling by hand or with

a soft piece of cloth.

• Close the lint filter and place it back into its

housing.

• A layer can build up on the filter pores that can

cause clogging of the filter after using the dryer

for a while. Wash the lint filter with warm water

to remove the layer that builds up on the lint

filter surface. Dry the lint filter completely before

reinstalling it.

• Clean the entire inner surface of the loading door

and loading door gasket with a soft damp cloth.

There are dampness sensors in the dryer that detect

whether the laundry is dry or not.

To clean the sensors:

• Open the loading doorof the dryer.

• Allow the machine to cool down if it is still hot due

to the drying process.

• Wipe the metal surfaces of the sensor with a soft

cloth, dampened with vinegar and dry them.

CClean metal surfaces of the sensors 4

times a year.

CDo not use metal tools when cleaning

metal surfaces of the sensors.