Warning: Ensure that the cold and hot water connections are made correctly when installing the machine.
Warning: Do not use water that is hotter than 50ºC
Fitting the water supply hose to the washing machine:
Hold the hose and turn the nut clockwise. Firmly hand tighten the nut.
To remove the hose, switch off the tap and then turn the nut counter clockwise.
The hose should not be twisted, bent or squeezed shut and must not be stepped on.
2.Pull the outlet end of the drain hose upwards and fix it with the hose clamp on the rear of the washing machine cabinet.
3.When the machine is not in use, hang the drain hose on the recess on the right side of the machine cabinet. When the machine is in operation, place the outlet end of the drain hose into the sink or a dedicated drainage outlet.
CAUTION: Ensure the height of drain hose is not less than 700 mm. The machine will not operate properly if the hose is less than 700 mm high.
Fitting the drain hose
1.Compress the two ears of the drain hose clamp with your hands and connect the drain hose to the pump outlet. Fix the clamp in place.
PAGE 8
Warning: The drain hose must be securely fitted for good water flow and to avoid risk of flooding or injury.
