Defy Appliances WMY 71283 MLCM C

19 / EN

Washing Machine / User’s Manual

If you want to cancel End Time function, press On / Off button to turn off and on the machine.

CDo not use liquid detergents when you activate End Time function! There is the risk of staining of the clothes.

1 Open the loading door, place the laundry and put detergent, etc.

2 Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.

3 Set the end time of your choice by pressing the End Time button. End Time indicator illuminates.

4 Press Start / Pause button. Time countdown starts. “:” sign in the middle of the end time on the display

starts flashing.

CAdditional laundry may be loaded during the End Time countdown period. At the end of the countdown, End Time indicator

turns off, washing cycle starts and the time of the selected programme appears on the display.

When the End Time selection is completed, the time appears on the screen consists of end time plus the duration of the

selected programme.

1. Press Start / Pause button to start the programme.

2. Programme follow-up light showing the startup of the programme will turn on.

CIf no programme is started or no key is pressed within 1-10 minute during programme selection process, the machine will

switch to OFF mode. Display and all indicators are turned off.

Selected programme data will be displayed if you press On / Off button.

There is a locking system on the loading door of the machine that prevents opening of the door in cases when

the water level is unsuitable.

"Door Locked" LED in the panel turns on when the loading door is locked.

After the programme has started you can make the following changes.

Press the Start/Pause button to switch the machine to pause mode while a programme is running. The light

indicating the Start/Pause status and programme step starts flashing on the Programme Follow-up indicator

to show that the machine has been switched to the pause mode. Also, Loading Door light will also flash until

the door is ready to be opened. When the loading door is ready to be opened loading door light will will turn off

and programme step indicator and Start / Stop LED continue to flash.

Also, when the loading door is ready to be opened, Loading Door light will also turn off in addition to the

programme step light.

Depending on the step the programme has reached, you can cancel or select the auxiliary functions. See,

"Auxiliary function selection".

You can also change the speed and temperature settings. See, "Spin speed selection" and "Temperature

selection".

CIf no change is allowed, the relevant light will flash for 3 times.