Delfield specifications Front-BreathingFlat Top Freezer Base, 4560N FLAT TOP, Models,  4560N

Models: 4560N

1 2
Download 2 pages 12.92 Kb
Page 1
Image 1
4560N FLAT TOP

4560N FLAT TOP

Front-Breathing Flat Top Freezer Base

Project_ __________________________

Item_____________________________

Quantity_ _________________________

CSI Section 11400

MODELS:

4560N

Two section freezer

 

 

with doors

_

4560N

Model 4560N

STANDARD FEATURES

All 4400 and 4500 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up

Durable, rugged stainless steel sides, top and front

Features Delfield’s exclusive ABS interior (on sides). ABS is extremely durable - it won’t dent, chip or corrode and is backed by a limited lifetime warranty

Heavy duty self-closing hinges

Environmentally friendly R404A refrigerant

High density foamed in place polyurethane keeps energy costs low

Black recessed quick grip handle

Standard on 2” casters for easy cleaning and installation

60-cycle single phase electrical system

7’ cord and plug supplied

Cord spring relief - prevents cord rollover

One epoxy coated wire shelf standard, installed per door section

ACT solid state electronic control

One year parts and 90 day labor standard warranty.

OPTIONS AND ACCESSORIES

Flat lift off cover

18” wide single tier overshelf

Stainless steel finish on back

Plastic laminate on front

Additional wire shelves

Door lock

Exterior thermometer

Interior lights

Glass door(s)

*220V/50 Hertz electrical system

*Inclusion of this option will alter electrical specifications of the unit.

FRONT-BREATHING FLAT TOP F
SPECIFICATIONS

Exterior top is one-piece, 22-gauge stainless steel with integral square nosing on the front.

Exterior back and bottom are two-piece24-gauge galvanized steel.

Exterior ends are stainless steel.

Interior sides are thermoformed ABS plastic with shelves supported on plugs. Interior back is one- piece 22-gauge stainless steel. Interior bottoms are thermofoamed ABS plastic. Base is fully insulated with high-density foamed in place polyurethane.

Refrigeration system uses HFC-404A refrigerant. Compressor is 1/5 H.P., with condenser coil and hot

gas condensate evaporator mounted on rear of the cabinet. Evaporator coils are located on the interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of -5°F to 0°F (-20°C to -18°C).

Electrical connection is 115 volt, 60 Hertz, single phase. Unit has a 7’ (2.1m) long electrical cord and NEMA 5-15P plug.

Casters Equipment is mounted on 2” (5.08cm) (2.5” ride height), diameter plate casters with front two locking.

Door has a 24-gauge stainless steel exterior, with thermoformed ABS plastic interior liner.

980 S. Isabella Road

Phone: 800-733-8948

Approval__________________

 

Mt. Pleasant, MI 48858

Fax: 800-669-0619

Date_____________________

www.delfield.com

Email: info@delfield.com

 

 

 

 

 

 

Page 1
Image 1
Delfield specifications Front-BreathingFlat Top Freezer Base, 4560N FLAT TOP, Front-Breathingflat Top F, Models