Microprocessor Module: Dell Inspiron 1100, 5100, and 5150 Service Manual
Back to Contents Page
Microprocessor Module Dell™ Inspiron™ 1100, 5100, and 5150 Service Manual
Removing the Microprocessor Module
CAUTION: Before performing the following procedures, read the safety
instructions in your Owner's Manual.
CAUTION: To prevent static damage to components inside your
computer, discharge static electricity from your body before you touch
any of your computer's electronic components. You can do so by
touching an unpainted metal surface.
NOTICE: Press and hold the microprocessor down by applying slight pressure to
the center of the microprocessor while turning the cam screw to prevent
intermittent contact between the cam screw and microprocessor.
NOTICE: To avoid damage to the microprocessor, hold the screwdriver so that
it is perpendicular to the microprocessor when turning the cam screw.
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the keyboard.
3. Remove the EMI shield.
4. For the Inspiron 5150, remove the display panel and then remove the palm rest.
5. Remove the microprocessor thermal-cooling assembly.
NOTICE: When removing the microprocessor module, pull the module straight
up. Be careful not to bend the pins on the microprocessor module.
6. To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-
socket cam screw counterclockwise until it comes to the cam stop.
file:///F|/Service%20Manuals/Dell/Inspiron/1100-5100-5150/cpu.htm (1 of 4) [2/28/2004 6:46:44 AM]