Back to Contents Page
Hinge Cover
Dell™Vostro™1220ServiceManual

Removing the Hinge Cover

1. Follow the procedures in Before Working Inside Your Computer.
2. During installation or removal of ANY hardware, always ensure all data is backed up properly.
3. Remove the battery from the computer.
4. Gently pry up the hinge cover.
5. Flip over the hinge cover toward the keyboard.
6. Disconnect the multimedia board cable.
7. Remove the hinge cover.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.