Back to Contents Page
LCD Rails
Dell™Vostro™1220ServiceManual

Removing the LCD Rails

1. Follow the procedures in Before Working Inside Your Computer.
2. During installation or removal of ANY hardware, always ensure all data is backed up properly.
3. Remove the battery, hinge cover, keyboard, optical drive, LCD assembly, LCD bezel and LCD panel from the system.
4. Remove the two screws from one of the LCD rails.
5. Remove the LCD rail away from the LCD panel.
6. Turn the LCD panel around.
7. Remove the two screws from the other LCD rail.
8. Remove the remaining LCD rail away from the LCD panel.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.