Loading Envelopes
Load envelopes in the printer as shown below:
NOTE: When you print on envelopes, be sure to specify the envelope setting on the printer driver. If not specified, the print image will be rotated 180 degrees.
Envelope#10
Identifying the Location of Paper Jams
The paper jams may occur at any of the locations shown below:
CAUTION: To avoid permanent damage to your printer, do not attempt to clear paper jams using any tools or instruments.
To prevent DL and Monarch from being wrinkled, they are recommended to be loaded with the
1
2
4
65
31 Output Tray
2 Transfer Belt
3Fuser Release lever
4 Rear Cover
5 Front Cover
6 Multipurpose Feeder (MPF)
C5, Monarch, or DL
Printing the Printer Settings Page
1Ensure that the green LED on the 
(Ready/Data) indicator is on and not blinking, and then press and hold the (Start) button for over three seconds.
The printer settings page is printed.
Finding Information
For more information, see the following documents available on the Drivers and Utilities disc.
•Setup Guide
Setup instructions for printer hardware. Access to software and drivers.
•User’s Guide
Additional information about printer components, paper jam clearance, and consumable replacement.
Troubleshooting
Clearing jams
ÆSee "Clearing Jams" in the User's
Guide
Print quality and other printing problems
ÆSee "Troubleshooting" in the User's
Guide
Common error messages
ÆSee "Understanding Printer Messages" in the User's Guide
Cleaning the Printer | Replacing Toners |
Vertical blanks in prints | To replace toners |
Æ See "Maintaining Your Printer" in the | ÆSee "Maintaining Your Printer" in the |
User's Guide | User's Guide |
An alert for the CTD sensor appears
ÆSee "Maintaining Your Printer" in the User's Guide
