OptionDescription
Click OK after entering the password details.
Strong Password
Password Configuration
Enable strong password - This option is disabled by default.
This field controls the minimum and maximum number of characters allowed for the admin and system passwords. Changes to these fields are not active until they are committed via the apply button or saving changes before exiting setup.
•Admin Password Min
•Admin Password Max
•System Password Min
•System Password Max
Password Bypass | This option lets you bypass the system (Boot) Password and the internal | |
| HDD password prompts during a system restart. | |
| • | Disabled |
| • Reboot Bypass (Default Enabled) | |
Password Change | Allows you to determine whether changes to the system and hard disk | |
| passwords are permitted when an administrator password is set. | |
| • Allow | |
This option lets you determine whether changes to the setup options are | ||
Changes | permitted when an administrator password is set. | |
| • Allow Wireless Switch Changes (Default) | |
TPM Security | This option lets you control whether the Trusted Platform Module (TPM) in | |
| the system is enabled and visible to the operating system. | |
| TPM Security (Default) | |
| • | TPM ACPI Support |
| • | Deactivate |
| • | Activate |
|
| NOTE: Activation, deactivation, and clear options are not affected if |
|
| you load the setup program's default values. Changes to this option |
|
| take effect immediately. |
PTT Security | Allows you to enable or disable PTT Support. | |
| • | PTT Security (Default) |
| • | Revoke Trust (Default) |
Computrace (R) | This field lets you activate / | |
| interface of the optional Computrace Service from Absolute Software. | |
| • | Deactivate (Default) |
| • | Disable |
| • | Activate |
41
