Back to Contents Page
Keyboard
Dell™Latitude™2100ServiceManual

Removing the Keyboard

1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery from the computer.
3. Remove the two keyboard screws.
4. Open the display to a 145-degree angle and set your computer on its edge atop the work surface.
5. Push a plastic scribe through the screw socket.
6. Lay the computer flat upon the work surface.
7. Starting at the top left corner of the keyboard, separate the keyboard from the computer.
8. Turn over the keyboard.
9. Open the keyboard data cable clip.
10. Disconnect the keyboard data cable.
11. Remove the keyboard from the computer.
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.