Network/Ports
Each Network sub-menu only appears if the device has a standard network card or if additional network card have been
installed.
Use the Network menu to change printer settings on jobs sent through a network port (either Standard Network or Network
Opt <x>).
1. From the menu list, use the Arrow buttons to scroll the Network menu.
2. Press the Select button .
3. Press the Right Arrow button until the heading you want appears on the display, and then press the Select button
.
4. Use the Arrow buttons to scroll through the available menu items.
5. When the setting you want appears on the display, press the Select button to save the setting.
Mode Mode Main Menu
Network/Port Network
USB
Parallel
Network Mode
Main Menu Mode Main Menu
Network PCL SmartSwitch
PS SmartSwitch
NPA Mode
Network Buffer
MAC Binary PS
Standard Network Setup
Network Mode Main Menu
From this
menu: You can:
PCL
SmartSwitch Set the printer to automatically switch to PCL emulation when a print job requires
it, regardless of the default printer language.
On*
Off
PS
SmartSwitch Set the printer to automatically switch to PostScript emulation when a print job
requires it, regardless of the default printer language.
On*
Off
NPA Mode Send print jobs to the printer and query printer status information simultaneously.
On
Off