Dell 3010 manual Reference, User Accessible, Remedial Action, Volatility Description, Telefax

Dell Inc.	Telephone: 512.338.4400
One Dell Way	Telefax: 512.728.3653
Round Rock, TX 78682

Date:	June 04, 2012
Subject:	Statement of Volatility – Dell OptiPlex 3010

To whom it may concern:

The Dell OptiPlex 3010 contains both “volatile” and “non-volatile” (NV) components. Volatile components lose their data immediately upon removal of power from the component. Non-volatile components continue to retain their data even after the power has been removed from the component. The following volatile and NV components are present on the Dell OptiPlex 3010 motherboard:

		Reference		User Accessible	Remedial Action
	Description		Volatility Description		(action necessary to
		Designator		for external data
					lose data)
Embedded		U36	96K bytes in non-volatile	No	N/A
Flash			memory
memory in
embedded
controller
SMSC5514E
System		U30	Non Volatile memory, 64Mbit	No	N/A
BIOS			(8MB), System BIOS and
			Video BIOS for basic boot
			operation, PSA (on board
			diags.)
Ethernet		U14	256 bytes in non-volatile	No	N/A
Controller			memory, which stores driver
Embedded			information and the system
Efuse			MAC address
System		Connectors :	Volatile memory in OFF state	No	Power off system
Memory –		DIMM1, DIMM2	(see state definitions later in		N/A
DDR3 DIMM			text)
memory			One or two modules will be
			populated. System memory
			size will depend on DIMM
			modules and will be between
			2GB to 4GB.
System		On memory	Non-Volatile EEPROM	No	N/A
memory		DIMM(s) – one,	memory. 2Kbit (256 bytes)
SPD		two, three, or	One Device present on each
EEPROM		four present	DIMM.
			Stores memory manufacturer
			data and timing information for
			correct operation of system
			memory.

Page 1