Dell 4310WX manual Network

NETWORK—Select On to activate network connection. Select Off to disable network connection. Press to activate Network menu. See "NETWORK" on page 42.

NETWORK

The Network menu allows you to configure the network connection settings.

DHCP—If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be acquired when you select DHCP On. If DHCP is Off, manually set the IP Address, Subnet Mask, and Gateway. Use to select the number of IP Address, Subnet Mask, and Gateway. Key in

Enter to confirm each number and then use to set the next item.

IP ADDRESS—Automatically or manually assigns the IP address to the projector connected to the network.

SUBNET MASK—Configure the Subnet Mask of the network connection.

GATEWAY—Check the Gateway address with your network/system administrator if you configure it manually.

DNS—Check the DNS Server IP address with your network/system administrator if you configure it manually.

STORE—Press to save the changes made in network configuration settings. RESET NETWORK—Select Yes to reset network configuration.

42

Using Your Projector