installed in your computer, you have two separate SCSI buses operating. Each SCSI bus has a set of SCSI ID numbers from 0 to 15.

When SCSI devices are shipped from the factory, the default SCSI ID numbers are assigned as follows:

 

System Board Controller

 

Controller Card

 

 

 

 

 

 

Device

 

ID

Device

 

ID

Controller

 

7

Controller

 

7

 

 

 

 

 

 

Boot hard drive

 

0

Boot hard drive

 

0

 

 

 

 

 

 

 

 

 

CD or DVD drive

 

5

 

 

 

 

 

 

 

 

 

tape or DAT drive

 

6

 

 

 

 

 

 

NOTE: There is no requirement that SCSI ID numbers be assigned sequentially or that devices be attached to the cable in order by ID number. If two or more devices use the same ID, your computer may hang during POST and in SCSI BIOS.

SCSI devices installed by Dell are configured correctly during the manufacturing process. You do not need to set the SCSI ID for these SCSI devices.

If you attach additional optional SCSI devices, see the documentation for each device for information about setting the appropriate SCSI ID number.

NOTICE: Dell recommends that you use only SCSI cables purchased from Dell. Cables purchased elsewhere are not guaranteed to work with Dell computers.

Device Termination

SCSI logic requires that termination be enabled for the two devices at opposite ends of the SCSI chain and disabled for all devices in between.

It is recommended that you use terminated cables and that you disable termination on all devices. See the documentation provided with any optional SCSI device you purchase for information on disabling termination on the device.

General Guidelines

Follow these general guidelines when installing SCSI devices in your computer:

Although you install SCSI devices essentially the same way as other devices, their configuration requirements are different. For details on configuring your particular SCSI subsystem, see the documentation for your SCSI devices and/or your host adapter card.

Configure the device for a SCSI ID number and disable termination, if necessary.

To use an external SCSI device, you must have a SCSI controller card installed in your computer. Connect one end of the external SCSI cable to the connector on the back of the SCSI device. Attach the other end of the external SCSI cable to the connector on the controller card installed in the computer.

After you install a SCSI hard drive, Primary Drive 0 and Primary Drive 1 should be set to None in system setup if no EIDE hard drives are installed. If you have any EIDE devices on the second EIDE channel, such as a CD or tape drive, Secondary Drive 0 and/or Secondary Drive 1 should be set to Auto.

You may need to use programs other than those provided with the operating system to partition and format SCSI hard drives. See the documentation that came with your SCSI software drivers for information on installing the appropriate drivers and preparing your SCSI hard drive for use.

SCSI Cables

Ultra 320 (optional on the Dell Precision 450 computer), Ultra 160/m and Ultra2/Wide LVD drives (typically hard drives) both use a 68-pin cable. One end of the cable attaches to the SCSI connector on the system board or the SCSI controller card installed in your computer. The remaining connectors on the cable attach to the various drives.

Narrow SCSI drives (tape drives, CD drives, and some hard drives) use a 50-pin cable. One end of this cable attaches to the SCSI controller card. The remaining connectors on the cable attach to the various Narrow SCSI devices.

NOTICE: Dell recommends that you use only SCSI cables purchased from Dell. Cables purchased elsewhere are not guaranteed to work with Dell computers.

Hard Drive

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the System Information Guide.

NOTICE: To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a surface, such as a foam pad, that will sufficiently cushion it.

1.If you are replacing a hard drive that contains data you want to keep, back up your files before you begin this procedure.

2.Shut down the computer through the Start menu.

3.Ensure that your computer and attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut down your computer, turn them off now.

Page 54
Image 54
Dell 450 Hard Drive, Device Termination, General Guidelines, Scsi Cables, System Board Controller Controller Card Device

450 specifications

The Dell 450 is a versatile and robust product designed to meet the diverse needs of users ranging from small businesses to large enterprises. Renowned for its reliability and performance, this model is particularly favored in environments that demand high productivity and efficiency.

One of the standout features of the Dell 450 is its powerful processing capability. Equipped with the latest generation processors, it offers options including Intel's Core i5 and i7 chips, along with advanced graphics options. This ensures smooth multitasking and the ability to run demanding applications without lag, making it an ideal choice for professionals in fields such as video editing, graphic design, and software development.

In terms of memory, the Dell 450 supports ample RAM configurations, allowing users to enhance their system’s capability to handle heavy workloads. With options for up to 32GB of DDR4 memory, users can expect seamless performance whether running multiple applications or engaging in resource-intensive tasks.

When it comes to storage, the Dell 450 offers various solutions including SSDs and HDDs, providing flexibility for users who require fast data access or large storage capacities. NVMe SSD options allow for lightning-fast boot times and quick file transfers, significantly improving overall system responsiveness.

The design of the Dell 450 balances functionality and aesthetics. Its sleek chassis not only looks modern but also promotes efficient cooling, enhancing system stability during prolonged usage. The device features a range of ports including USB-C, HDMI, and Ethernet, ensuring compatibility with various peripherals and networks, which is vital for today’s connected environment.

Dell’s commitment to security doesn’t go unnoticed in the 450 model. It includes features such as TPM (Trusted Platform Module) for hardware-based security, and options for biometric authentication, ensuring that sensitive data remains protected.

Another significant aspect is Dell’s reliable customer support, which enhances the overall ownership experience. With warranty options and various support plans, users can feel confident in their investment, knowing assistance is readily available when needed.

In conclusion, the Dell 450 combines powerful processing, ample memory, versatile storage options, modern design, and robust security features, making it a compelling choice for users seeking a dependable computing solution. Whether for personal use or in a corporate setting, the Dell 450 is equipped to deliver excellent performance and reliability.