38 Setup and Quick Reference Guide
www.dell.com | support.dell.com
A possible microprocessor
failure has occurred.
Reinstall the microprocessor and restart the computer.
Memory modules are
detected, but a memory
failure has occurred.
1Reset the memory modules to ensure that your
computer is successfully communicating with the
memory.
2Restart the computer.
3If the problem still exists, remove all the memory
modules and install one memory module in
memory module connector 4.
4Restart the computer.
The following message appears: Alert!
Operating in Debug Mode. Please
Populate Memory in Pairs for Normal
Operation.
5Press <F1> to boot to the operating system.
6Run the System Memory test group in the Dell
Diagnostics.
7If the memory module passes, shut down the
computer, remove the memory module, and repeat
the process with the remaining memory modules
until a memory error occurs during start-up or
diagnostic testing.
If the first memory module tested is defective,
repeat the process with the remaining modules to
ensure that the remaining modules are not
defective.
8When the defective memory module is identified,
contact Dell for a replacement.
NOTE: If necessary, the computer can operate in
debug mode until new memory modules are installed.
Light Pattern Problem Description Suggestion Resolution
= yellow
= green
= off
A B C D
A B C D