Dell 7609WU between Presentation mode, Bright mode, Movie mode, sRGB, or CUSTOM mode for the

1	Power	Turns the projector on and off. For more
		information, see "Turning Your Projector On" on
		page 21 and "Turning Your Projector Off" on
		page 21.
		Press and hold for 10 seconds to exit the lockup
		state and go back to standby mode when
		projector is in lockup state. (eg. Lamp error, over
		heat etc.)
2	Enter	Press to confirm the selection.
3	Right	Press to adjust the OSD setting.
4	Down	Press to select OSD items.
5	Aspect Ratio	Press to change the aspect ratio of a displayed
		image.
6	Page up	Press to move to the previous page.
7	Mute	Press to mute or un-mute the projector speaker.
8	Page down	Press to move to the next page.
9	Video mode	The Dell 7609WU projector has preset
		configurations that are optimized for displaying
		data (PC Graphics) or videos (movies, games,
		etc.). Press the Video Mode button to toggle
		between Presentation mode, Bright mode,
		Movie mode, sRGB, or CUSTOM mode (for the
		user to set up and save preferred settings).
		Pressing the Video Mode button once will show
		the current display mode. Pressing the Video
		Mode button again will allow the projector to
		switch between display modes.
10	Blank screen	Press to hide / un-hide the image.
11	Up	Press to select OSD items.
12	Left	Press to adjust the OSD setting.
13	Menu	Press to activate the OSD.
14	Volume up	Press to increase the volume.
15	Laser	Aim the remote control at the screen, press and
		hold the laser button to activate the laser light.
16	Volume down	Press to decrease the volume.

Using Your Projector

28