Appendix
■Transparencies and Labels
You may also print on transparencies and labels that are made for the printer. The following work satisfactorily.
OHP transparency | 3M CG3700, 3M CG3710 |
Labels | AVERY 5163, AVERY 5164, AVERY 5165 |
| Avery L7163, Avery L7165, Avery L7166, Avery L7167 |
| Avery L7168, Avery L7169 |
|
|
Using OHP Film
When printing on OHP film it is extremely important that the correct side of the film be facing up when in is loaded into the printer. Failure to load the film correctly may result in jams or damage to the printer.
Note:
No precaution is necessary when using 3M CG3700 film, as this film can be printed on either side and fed in any direction.
•When loading OHP film into the
Direction of paper feed
3M CG3710 Generic OHP Film
When using OHP film that has an adhesive paper strip (3M CG3710), make sure that the paper strip is on the leading edge and that the paper strip is facing DOWN.
When using OHP film that has a notched corner, make sure that the notched corner is on the trailing edge and that the notched corner is on the left.
•When loading OHP film into the cassette
Direction of paper feed
3M CG3710 Generic OHP Film
When using OHP film that has an adhesive paper strip (3M CG3710), make sure that the paper strip is on the leading edge and that the paper strip is facing UP.
When using OHP film that has a notched corner, make sure that the notched corner is on the trailing edge and that the notched corner is on the right.
114
