HP Ci 1100 Care and Maintenance, Error Message, Possible Cause, Corrective Action, CONTINUE key

Care and Maintenance

Error Message	Possible Cause	Corrective Action
RAM DISK error ##		99: MPS: No job in the virtual
Press CONTINUE		bin specified for output or that
		page is missing.
Read font ?	A font could not be read	A download font could not be
Failed	due to insufficient memo-	loaded into printer memory
	ry.	due to insufficient available
		printer memory. Either
		remove unnecessary download
		fonts or expand printer memo-
		ry.
Read macro ?	A macro could not be	A download macro could not be
Failed	read due to insufficient	loaded into printer memory
	memory.	due to insufficient available
		printer memory. Either remove
		unnecessary download macro
		or expand printer memory.
Replace Ci1100	The fuser is worn out.	Replace the fuser kit now.
Fuser KIT
Replace Ci1100	The imaging unit is worn	Replace the imaging unit now.
Imaging unit	out.
Replace Ci1100	The oil supply roller is	Replace the oil supply roller
Oil supply roll	worn out.	now.
Replace Toner	The cyan toner developer	Replace the cyan toner devel-
Ci1100 (Cyan)	is empty.	oper now.
Replace Toner	The black toner developer	Replace the black toner
Ci1100 (Black)	is empty.	developer now.
Replace Toner	The magenta toner	Replace the magenta toner
Ci1100 (Magenta)	developer is empty.	developer now
Replace Toner	The yellow toner develop-	Replace the yellow toner
Ci1100 (Yellow)	er is empty.	developer now.
Reset Fuser cln.	The printer is waiting for	Press ENTER and the printer
pad Press ENTER	your input confirming that	resets the transfer unit
	you have replaced the	counter to 0000000.
	Cleaning Pad and reset-	If you have not replaced the
	ting its counter (☞ P. 45).	Cleaning Pad, press EXIT, to
		prevent the counter from being
		reset.
Reset Trans.Roll	The printer is waiting for	Press ENTER and the printer
Press ENTER	your input confirming that	resets the transfer unit
	you have replaced the	counter to 0000000.
	transfer roller and reset-	If you have not replaced the
	ting its counter (☞ P. 45).	transfer roller, press EXIT, to
		prevent the counter from being
		reset.
Set paper	The multi-purpose tray is	Add a sheet of paper to the
Press CONTINUE	empty.	multi-purpose tray, and press
		CONTINUE key.

98