Care and Maintenance
Error Message | Possible Cause | Corrective Action | |
|
|
| |
I/F occupied | The front control panel | Wait until the data transfer is | |
| operation you attempted | completed on that interface. | |
| is not possible because |
|
|
| that interface is receiving |
|
|
| data. |
|
|
|
|
| |
Imaging unit | The imaging unit is not | Lift the imaging unit lever | |
not locked | locked properly because | fully up. |
|
| its lever is not lifted. |
|
|
|
|
| |
Insert the same | A different memory card | Reinsert the same memory | |
MEMORY CARD | was inserted following the | card as was removed previous- | |
| MEMORY CARD err/ | ly into the printer’s memory | |
| Insert again message. | card slot. |
|
|
|
| |
KPDL Error ## | The printer encountered | Note the error code of ## and | |
Press CONTINUE | an error during process- | press CONTINUE to clear the | |
| ing data in KPDL mode. | error situation. See section | |
|
| KPDL Error Codes (☞ P. 100) | |
|
| for information. |
|
|
|
|
|
Left cover Open | The left side cover is open. | Close it tightly. |
|
|
|
| |
Load (paper source) | The paper size or type | One of MP tray, Cassette 1 | |
(paper size)(media type) | does not match the | to 3, will be displayed in | |
| printing area. | place of "paper source". Load | |
|
| the paper displayed on the | |
|
| message display and press the | |
|
| CONTINUE key to print. | |
|
| Or, pressing the FEED key | |
|
| without pressing the CONTIN- | |
|
| UE key, will cause Use | al- |
|
| ternative? to be displayed, | |
|
| and a different paper source | |
|
| can be selected to supply | |
|
| paper. The paper source | |
|
| changes each time the FEED | |
|
| key is pressed. And press the | |
|
| MODE key to display Paper | |
|
| handling>. Press the | key |
|
| and you can change the paper | |
|
| source setting using the + or - | |
|
| key to select. Load paper | |
|
| appropriate for the paper | |
|
| source and press the EXIT key | |
|
| to print. |
|
|
|
|
|
94
