Setup
2 Compare the current color density settings on the Color Calibration Page with the color density samples on the Color Calibration Reference to see if they match.
Place the Color Calibration Page on at least 2 sheets of clean white paper in a
10 10 10 10
Color Calibration
Page
Color Calibration
Reference
If they match, you do not need to adjust the color density. If they do not match, go to step 3.
3 Press the + key until the message display shows >Cyan. The current density setting for cyan is indicated (the default is 10).
(1)Press the ENTER key.
>Cyan
10
(2)Press the + or - key to darken or lighten the cyan color.
For example:
•If you wish to make the density setting darker:
–Press the + button (up to 20).
•If you wish to make the density setting lighter:
–Press the - button (to 00).
(3)Press the ENTER key.
32
