Setup
2 Remove the base plate stopper from inside the media cassette; refer to the instruction sheet attached to the cassette.
|
| (1) | Base plate stopper |
|
|
| |
|
|
| (4) |
(3) | (2) |
| (5) |
|
| ||
|
|
|
3 Push down on the metal plate until it clicks, locking it in place.
4 Fan the media (paper/transparencies), then tap it on a level surface to avoid media jams or skewed printing.
Notes:
•To optimize your printer’s performance, always use clean, unused media.
•Be careful not to leave fingerprints on the media, which can result in a smudged print.
•Reusing media that has been fed through the printer once (for example, after jams) can reduce the life of the consumables and paper path components.
•Recommended transparency types are 3M CG3700 and 3M CG3710. If the print quality is poor, print on the other side.
17
