Other menus Others, MP tray type, Auto cassette mode

Using the Printer

Cassette mode

Approximately 100 sheets of paper can be continuously fed.

Note:

In First mode, printing is carried out using custom size paper feed timing regardless of the MP tray size setting.

MP tray type

When cassette is selected as the MP tray mode, the paper source is automatically selected according to the print data. Set MP tray size and MP tray type to match the type of paper to be loaded into the MP tray. If received print data does not match the type of paper loaded in the paper source, the printer displays an error message (☞P.93) and printing is interrupted.

When this occurs, printing can be resumed by loading the type of paper indicated by the error message into the MP tray and pressing the CONTINUE key.

Auto cassette mode

The Auto cassette mode is available only when the printer is installed with the optional paper feeder. This menu selects one of the automatic paper cassette switching modes for normal paper. The numbers below refer the media cassettes of the printer and the option paper feeder: 1 for the upper cassette; 2 for the middle cassette; and 3 for the lower cassette. The Size select automatically searches all media cassettes for the paper size commanded by the document.

Note:

The printer does not switch cassettes automatically if the media is transparency.

Override A4/LT

This sets whether to enable or disable the difference between A4 size and letter size. Under the default setting of Off, the paper size of the paper source is matched to the paper size given for the data, and if these differ a corresponding error message is displayed. When this is set to On, printing is performed even if the actual paper size differs from the paper size given for the data.