HP Ci 1100 manual Navigating through the menus, Press the Mode key

Using the Printer

Navigating through the menus

The menus are in the hierarchy as shown in the diagram above. Use the + and - keys to move between menus in the same level (“vertically” in the table). The + key shows the next menu, while the - key shows the previous one. Change levels by using the and keys. The key moves to lower levels (sub-menus), while the key moves to higher levels.

(2), (4), (6)

(3)

(5), (7)

(1), (8)

To change a specific item, for example, the sleep mode timeout time, proceed as follows:

1 Press the MODE key.

The message display will show one of the first level menus (Level 1 in the table on pages 34 to 36) depending on the previous selection.

2

3

Press + until Others > is shown on the display.

Press .

The message display will show one of the second level menus (Level 2 in the table on pages 34 to 36) belonging to the Others menu above depending on the previous selection.

4

5

6

7

8

Press + until Sleep timer is shown on the display.

To change the timeout value, press ENTER.

If you want to abandon setting, press CANCEL, then press MODE.

Press + repeatedly to increase the timeout time; press - repeatedly to decrease the timeout time until the desired timeout time (in minutes) is displayed.

Press ENTER to confirm the new setting.

You can abandon the new setting by pressing CANCEL, then MODE.

To quit the mode selection sequence, press EXIT.

37