Using the Printer
■Number of copies
The Number of copies menu sets the number of copies to be printed.
Level 1 | Range |
Number of copies | 001 (Default) to 999 |
|
|
■Emulation
The Emulation menu switches the printer emulation. KPDL is implementation of the Adobe’s PostScript language. KPDL (AUTO) automatically switches the printer emulation.
Level 1 |
| Range |
Emulation | PCL 5C | |
|
|
|
| KPDL |
|
|
|
|
| KPDL | (AUTO) |
|
|
|
Notes:
• For details about the emulation menu, see the table marked “*1 ” on page 34.
•The printer can be set to print error data during KPDL emulation. If this is set to On, error data will be printed if trouble occurs during printing. This is set to Off before leaving the factory.
■Font
The Font menu selects the printer font. The fonts available vary depending on the emulation.
Level 1 | Range | Options | Description |
Font | Bitmap | Fontnumber | See Font Number on list of resident |
|
|
| fonts that can be printed by referring |
|
|
| to List of Resident Fonts (☞ P. 48). |
|
|
|
|
| Scalable | Fontname | See the tables on pages 41 to 42. |
|
|
|
|
|
| Size | 004.00 to 999.75 (points) |
|
|
|
|
|
| Pitch | 00.44 to 99.99 (cpi) |
|
|
|
|
Note:
The >Size menu is not available for the Courier and LetterGothic fonts. Use the >Pitch menu to scale these fixed fonts.
For example, to select the
1
2
3
4
Press MODE.
Press the + key repeatedly until the message display shows Font >.
If the Font > menu shows Scalable, proceed to step 4. If it shows Bitmap, press ENTER (The question mark appears blinking), press
+(Bitmap changes to Scalable), then press ENTER (The question mark disappears).
Press the 
key. The current scalable font is indicated.
39
