Using the Printer

Memory Cards

This printer is equipped with a memory card slot. If a JEIDA Ver. 4.2 memory card is used, it is possible to read, write and delete data, and format the memory card.

Note:

Only 32 MB or less, flash or S-RAM type memory cards, conforming to JEIDA Ver. 4.2, can be written or formatted by this printer.

Font cards can be read from the control panel or read automatically upon power-on or printer reset when a font card is inserted in the printer.

Inserting a Memory Card

Warning:

When adding memory, ALWAYS remove the power plug from the outlet. If this operation is performed with the power still attached, there is a danger of electrical shock.

Carefully insert the memory card as far as it will go with the top (label) side facing as shown below.

Memory Card Slot

Top Side of

Memory Card

Notes:

Follow the precautions below when handling memory cards:

Memory cards are sensitive to static electricity. Before handling a memory card, be sure to eliminate any static electricity which may have built up on your body or clothing by touching a metallic object.

Use flash memory cards or S-RAM memory cards conforming to JEIDA Ver. 4.2 which are approved by us.

Be sure that its power is off when inserting or removing a memory card.

Do not insert memory cards into the slot with undue force.

Do not bend memory cards.

Do not drop memory cards or subject them to shock.

Do not splash water or other liquids on memory cards.

Do not place memory cards near fires or heat sources.

Do not subject memory cards to direct sunlight.

Store memory cards in their protective case when not using them.

57

Page 66
Image 66
HP Ci 1100 manual Memory Cards, Inserting a Memory Card